Product Overview | Specification | Order form | Authentication |
|
Product Overview
The S3800 series switches are 10Gigabit IPv6 Ethernet Layer 3 switch. There are 4 types switch for this family. The product family include S3800-28T;S3800-52T. All products support IPv6 with hardware and pass the IPv6 form certification Phase II. All products comply with the RoHS standard. With the high performance hardware support and rich software features, the switches will match most application for customers.
The S3800 series products are ideal for use in the distribution or aggregation layer of large networks to provide long distance fiber connections to aggregate access layer switches that are dispersed in different locations. It is also an excellent choice as a core switch for enterprise customers. The S3800 series products include over 24 GE/48GE ports and max 4 10GE ports can deployed at Data Center and as a convergence switch for access switches or DSLAM. With RPS support.
Target Market
With the rich features and high performance and flexible ports, the products can be deployed to the following networks:
|
|
|
|
|
|
MAN |
Campus |
LAN |
Dual Stack |
Core |
N |
N |
Y |
Y |
Aggregation |
N |
Y |
Y |
Y |
Access |
Y |
Y |
Y |
Y |
|
Specification
Pictures |
|
|
|
|
Attributes |
S-3800-28X |
|
S-3800-24X |
|
Ports |
24 1000M SFP , 4xCOMBO (GT) 2 slots, |
|
12 10/100 /1000 Ethernet Ports , 12 1000M SFP 2 slots, |
|
Performance |
Switching
Capability |
128Gbps |
|
128Gbps |
|
Throughput |
96Mbps |
|
96Mbps |
|
MAC Address |
8K |
|
8K |
|
VLAN Table |
4K |
|
4K |
|
ACL TABLE |
2K |
|
2K |
|
Routing Table |
256 for IPv4 and IPv6 |
|
256 for IPv4 and IPv6 |
|
L3 Interface |
512 |
|
512 |
|
Port Queues |
8 |
|
8 |
|
Pictures |
|
|
|
|
Attributes |
S-3800-28T -POE |
S-3800-52T -POE |
S-3800-28T |
S-3800-52T |
Ports |
24 10/100 /1000 Ethernet Ports with POE , 4xCOMBO
(SFP/GT) 2 slots, |
48 10/100/1000 Ethernet Ports with POE 4xCOMBO
(SFP/GT) 2 slots, |
24 10/100 /1000 Ethernet Ports , 4xCOMBO
(SFP/GT) 2 slots, |
48 10/100/1000 Ethernet Ports 4xCOMBO
(SFP/GT) 2 slots, |
Performance |
Switching
Capability |
128Gbps |
176Gbps |
128Gbps |
176Gbps |
Throughput |
96Mbps |
131Mbps |
96Mbps |
131Mbps |
MAC Address |
8K |
8K |
8K |
8K |
VLAN Table |
4K |
4K |
4K |
4K |
ACL TABLE |
2K |
2K |
2K |
2K |
Routing Table |
256 for IPv4 and IPv6 |
256 for IPv4 and IPv6 |
256 for IPv4 and IPv6 |
256 for IPv4 and IPv6 |
L3 Interface |
512 |
512 |
512 |
512 |
Port Queues |
8 |
8 |
8 |
8 |
Physical |
Dimension
(WHD) |
415mm×44mm
×325mm |
415mm×44mm
×325mm |
415mm×44mm
×325mm |
415mm×44mm
×325mm |
Relative
Humidity |
5% ~ 90%, non-condensing |
5% ~ 90%, non-condensing |
5% ~ 90%, non-condensing |
5% ~ 90%, non-condensing |
Operating Temperature |
0℃ ~ 50℃ |
0℃ ~ 50℃ |
0℃ ~ 50℃ |
0℃ ~ 50℃ |
Storage Temperature |
-40℃ ~ 70℃ |
-40℃ ~ 70℃ |
-40℃ ~ 70℃ |
-40℃ ~ 70℃ |
Power |
AC: 90- 264V, 47-63Hz DC: -40--60V |
AC: 90- 264V, 47-63Hz DC: -40--60V |
AC: 100- 240V, 50-60Hz DC: RPS |
AC: 100- 240V, 50-60Hz DC: RPS |
Power Consumption |
450W (all poe) 15.4W per port |
850W (all poe) 15.4W per port |
130W |
180W |
EMC safety |
FCC, CE, RoHS |
FCC, CE, RoHS |
FCC, CE, RoHS |
FCC, CE, RoHS |
Features |
Forwarding |
|
L2 Features |
- IEEE802.3(10Base-T)
- IEEE802.3u(100Base-TX)
- IEEE802.3z(1000BASE-X)
- IEEE802.3ab(1000Base-T)
- IEEE802.3ae(10GBase)
- Loopback interface
- 9k Jumbo Frame
- Port loopback detect
- LLDP
|
- Support LACP 802.3ad, max 128 group trunk with max 8 ports for each trunk,
- Support load balance
|
- IEEEE802.1d(STP)
- IEEEE802.1W(RSTP)
- IEEEE802.1S(MSTP) Max 48 instance
- Root Guard
- Bpdu Guard
|
- Support one to one or any to one mirror
|
- IGMP v1/v2/v3, IGMP v1/v2/v3 Snooping, IGMP Proxy
- ICMPv6, ND, ND snooping, MLDv1/v2, MLDv1/v2 snooping
|
- QinQ, GVRP, Broadcast / Multicast / Unicast Storm Control
- Port/ MAC/ IP segment/ Portocol/ Voice/ Private/ Vlan support
- Multicast Vlan register/MVR for IPv4 and IPv6 service
|
- Support port-based 802.1Q, 4096 VLAN
|
- MAC binding(Ipv4 /Ipv6), MAC filter, MAC limit
|
|
L3 Features |
- IP Protocol(IP support both of IPv4 and IPv6)
|
- Default Routing, Static Routing, Black hole route, VLSM and CIDR,
|
|
- Policy based Routing(PBR) for IPv4 and IPv6
|
|
- Static Multicast route
- Multicast receive control
- Illegal multicast source detect
- Any cast RP for Ipv4 and Ipv6
|
|
- ARP guard, Local ARP proxy, Proxy ARP, ARP binding, Gratuitous ARP, ARP limit
|
QoS |
- 8 hardware queues per port
|
- Support traffic classification based on IEEE 802.1p, ToS, port and DiffServ
|
|
|
|
ACL |
- Support standard and expanded ACL
|
- Support IP ACL and MAC ACL
|
- Support ACL based on source/definition IP, MAC, L3 IP, TCP/UDP port number, IP PRI(DSCP, ToS, Precedence), Time
|
ACL-X |
- Support time-based security auto-negotiation
|
- ACL rules can be configured to port, VLAN, VLAN routing interfaces
|
- Can be used for QoS classification
|
Anti-attack and Security |
|
- S-ARP: ARP inspection, defense ARP-DOS attack and address clone
|
- Anti-Sweep: prevent pingSweep
|
- S-ICMP: resist PING-DOS attack, ICMP unreachable attack
|
- S-Buffer: prevent DDOS attack
|
- Switch engine CPU protection
|
- Key message priority: secure processing of key legal messages
|
- Port credit: inspect illegal DHCP Server, Radius Server. Connection via credit port only
|
- Advanced LPM: filter “Bluster”, “zero day” and ”SQL slammer warm”
|
- Support URPF, avoid IP address clone
|
- All the above technologies efficiently prevent various DOS attack (e.g. ARP, Synflood, Smurf, ICMP attack), support ARP monitoring, defense Worm, Bluster, check sweep and raise alarm
|
Reliability and Redundancy Balance |
|
- Support VRRP, LACP load balance
|
- MRPP - Multi-layer Ring Protection Protocol
|
DHCP |
- Support DCHP Client, Relay, Snooping, Option 82
|
- DHCP Server for IPv4 and IPv6
|
- DHCP v6 and DHCP snooping V6
|
DNS |
|
IEEE 802.1X |
- Base Port, MAC, authentication mode
- Support account based on time length and traffic
- Support guest vlan and auto vlan
- Work with private client can manage P2P traffic
|
AAA |
- Support RADIUS for IPv4 and IPv6
- TACACS+
|
POE* |
- Support max 15.4W per port and full 10/100/1000 Base-T port can support POE
The feature need PSU support
|
|
Stack and Cluster |
- Support max 24 units cluster with 10GE ports and managed by single IP
|
Configuration and Management |
- Support CLI, Console(RS-232), Telnet (Ipv4/Ipv6), SSH(Ipv4/Ipv6),SSL connection
|
|
- Support SNMPv1/v2c/v3 for IPv4, SNMPv1/v2c for IPv6
|
|
|
|
SysLog |
- Support, RAM, Telnet, SSH Console, Syslog server
|
NMS |
- Strict access control by ACL
- Access Switch through AAA or Local Authentication
- SNTP for IPv4 and IPv6
- NTP for IPv4 and IPv6
|
Language |
- Support Chinese and English language GUI
|
Configuration Management |
- Configuration file storage
- Command operation log
|
|
Order Information
Product |
Description |
QTS-3800-52T |
10G IPv6 Routing Switch (48* 10/100/1000Base-T+4 Gigabit Combo(SFP/GT) ports+2 slot |
QTS-3800-28T |
10G IPv6 Routing Switch (24* 10/100/1000Base-T+4 Gigabit Combo(SFP/GT) ports+2 slot |
QTS-3800-28X |
10G IPv6 Routing Switch (24* 11000Base-SFP+4 Gigabit Combo(GT) ports+2 slot |
QTS-3800-24X |
10G IPv6 Routing Switch (12* 10/100/1000Base-T+12 Gigabit SFP ports+2 slot |
QTS-3800-52T-POE |
10G IPv6 Routing Switch (48* 10/100/1000Base-T【PoE】+4 Gigabit Combo(SFP/GT) ports+2 slot |
QTS-3800-28T-POE |
10G IPv6 Routing Switch (24* 10/100/1000Base-T【PoE】+4 Gigabit Combo(SFP/GT) ports+2 slot |
MRS-2XFP |
QTS-3800 series 2* 10G module(XFP interface) for QTS-3800-52T/52T-POE and 28T/28T-POE |
|
|
|
|